Semikron launches Dual Module for motor drives, solar inverters and power supplies
Power electronics manufacturer Semikron have announced a user-friendly spring technology for the power and control terminals as well as the simple, cost-effective and solder-free single-screw assembly of the circuit board, cooling unit and module "“ these are the key benefits of the MiniSKiiP product family made by power electronics manufacturer Semikron.
The MiniSKiiP is primarily used in industrial motor drives, solar inverters and power supplies. Following the power range of up to 40 kW, the MiniSKiiP is now available for power ranges up to 90 kW. The portfolio of the new MiniSKiiP Dual covers 150A-300A/650V, 150A-300A/1200V and 100A-300A/1700V.
For the first time MiniSKiiP Spring Technology is available for power ratings higher than 40 kW. The benefits: lower material costs as compared to traditional inverter designs because the expensive bus-baring of the load connectors can be replaced by a cost-efficient PCB connection. In combination with a fast, solder-free assembly, this allows for reducing the system costs by up to 15 percent. The spring contacts make the layout of the printed circuit board (PCB) simpler and more flexible because the PCB does not need holes for soldering pins. Also, the springs allow for a more flexible connection between the PCB and the module than a soldered joint, which adds extra benefits particularly under thermal and mechanical stress.
The MiniSKiiP Dual's output of up to 90 kW requires higher current-carrying capability of the PCB, which e. g. can be achieved by using a 105µm standard metal coating on the PCB. This allows for load currents up to 180 ARMS, which used to be reserved for modules with screw mounted busbars.
