+44 (0)24 7671 8970
More publications     •     Advertise with us     •     Contact us
 
Loading...
News Article

GaN 'as Easy to Use as Silicon'

News

EPC introduces 48V to 12V demo board featuring eGaN FETs and Renesas dc-dc controller

EPC announces the availability of the EPC9157, a 300 W DC-DC demo board in the tiny 1/16th brick size, measuring just 33 mm x 22.9 mm x 9mm (1.3 x 0.9 x 0.35 in). The EPC9157 demo board integrates the Renesas ISL81806 80 V dual synchronous buck controller with the latest-generation EPC2218 eGaN FETs from EPC to achieve greater than 95 percent efficiency for 48 V input to 12 V regulated output conversion at 25 A.

Brick DC-DC converters are widely used in data centres, computing, telecommunications and cars, converting a nominal 48 V to a nominal 12 V distribution bus, among other output voltages. The main trend has been towards higher power density. eGaN FETs provide the fast switching, high efficiency and small size that can meet the stringent power density requirements of these leading-edge applications. EPC2218 is the smallest high efficiency 100 V eGAN FET on the market.

Renesas’ ISL81806 is the industry’s first 80V dual-output or two-phase synchronous buck controller with integrated GaN drivers, supporting switching frequencies up to 2 MHz. It uses peak current mode control and generates two independent outputs, or one output with two interleaved phases. It supports current sharing, synchronization for paralleling more controllers and/or more phases, enhanced light load efficiency, and low shutdown current. Protection features include input UVLO, over current, over voltage and over temperature.

The ISL81806 can directly drive EPC GaN FETs, ensuring easy design, low component count and low solution cost. The highly integrated ISL81806 reduces BOM cost for GaN solutions because it does not require any microcontroller, current sense amplifiers, or housekeeping power. More information is available at www.renesas.com/isl81806.

Alex Lidow, CEO of EPC commented: “Renesas’ synchronous buck controller IC makes using GaN even easier. We are delighted to work with Renesas to combine the benefits of its advanced controllers with the performance of GaN to provide customers with a low component-count solution that increases efficiency and power density and reduces system cost for 48 V power conversion.”

“The ISL81806 takes full advantage of the high performance of GaN FETs for high-power-density solutions while reducing BOM costs. It makes designing with GaN FETs as simple as using silicon-based FETs,” said Philip Chesley, VP of the Industrial and Communications Business Division at Renesas. “We are excited to work alongside EPC to provide our customers with the latest in power conversion technology.”


×
Search the news archive

To close this popup you can press escape or click the close icon.
Logo
×
Logo
×
Register - Step 1

You may choose to subscribe to the Power Electronics World Magazine, the Power Electronics World Newsletter, or both. You may also request additional information if required, before submitting your application.


Please subscribe me to:

 

You chose the industry type of "Other"

Please enter the industry that you work in:
Please enter the industry that you work in: